Freescale Semiconductor, Inc.
MC33593
State 9:
If Header or its complement is detected, the state machine advances to state 10. If not, it will stay in state 9 as
long as STROBE is high.
State 10:
If Header has been received, data and clock signals are output on the SPI port. If the complement of Header has
been received, output data are complemented too. At any time a low level applied on STROBE sets the circuit
into state 6, after the current byte is fully transmitted.
State 11:
If data are received after a End of Message they are output on the MOSI pin without clock recovery.
For all states:
At any time, a low level applied on RESETB for more than one Ts forces the state machine to state 1. When the
transition condition from one state to the next one is fulfilled, the transition time is one Ts except reaching state 6.
The transition time for reaching state 6 is 2 × Ts (+ time needed to shift out a full byte if STROBE pin is forced to
low when in state 10).
STROBE OSCILLATOR
The Strobe Oscillator is a relaxation oscillator in which an external capacitor C5 is charged by an external
resistance R2 (refer to figure 17 and table 11). When a threshold is reached or exceeded C5 is discharged and
the cycle restarts. The period is: T Strobe =0.12 × R2 × C5.
The circuit may be forced into states 0b, 3, 7 etc. (see State Machine Diagrams) by setting the STROBE pin to
V CC . As V CC is above the oscillator threshold voltage referred to in the previous paragraph, the condition in which
the STROBE pin is set to V CC is internally detected and the oscillator pull-down circuitry disabled to limit the
current which must be supplied.
For More Information On This Product,
Go to: www.freescale.com
? Motorola, Inc., 2002.
MOTOROLA SEMICONDUCTORS PRODUCTS
16
revision 7.0, 5 February 2002
相关PDF资料
MC33690DWER2 IC STAND ALONE TAG READER 20SOIC
MC44CC375AVEFEVK CCEVK NEJA EVAL KIT
MCH3374-TL-E MOSFET P-CH 12V 3A MCPH3
MCH3375-TL-H MOSFET P-CH 1.6A 30V MCPH3
MCH3377-TL-E MOSFET P-CH 20V 3A MCPH3
MCH3377-TL-H MOSFET P-CH 3A 20V MCPH3
MCH3382-TL-H MOSFET P-CH 2A 12V MCPH3
MCH3383-TL-H MOSFET P-CH 12V 3.5A MCH3
相关代理商/技术参数
MC33594FTA 功能描述:射频接收器 315 434 MHz RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
MC33594FTAE 功能描述:射频接收器 UHF RECEIVER RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
MC33594FTAER2 功能描述:射频接收器 UHF RECEIVER RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
MC33594FTAR2 功能描述:IC RF RECEIVER 315,434MHZ 24LQFP RoHS:否 类别:RF/IF 和 RFID >> RF 接收器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS 产品变化通告:Product Discontinuation 09/Jan/2012 标准包装:50 系列:* 频率:850MHz ~ 2.175GHz 灵敏度:- 数据传输率 - 最大:- 调制或协议:- 应用:* 电流 - 接收:* 数据接口:PCB,表面贴装 存储容量:- 天线连接器:PCB,表面贴装 特点:- 电源电压:4.75 V ~ 5.25 V 工作温度:0°C ~ 85°C 封装/外壳:40-WFQFN 裸露焊盘 供应商设备封装:40-TQFN-EP(6x6) 包装:托盘
MC33596FCAE 功能描述:射频接收器 UHF REICEVER RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
MC33596FCAER2 功能描述:射频接收器 UHF REICEVER RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
MC33596FCE 功能描述:射频接收器 PLL Tuned UHF Recvr RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
MC33596FCER2 功能描述:射频接收器 PLL Tuned UHF Recvr RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel